FCH Member Advertisement
FCH News
#3 Countersink Cutters
A Countersink Cutter, or Countersink Bit is used to cut or enlarge a conical edge to a pre-drilled hole, usually in metal. A fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
8 results, (click on any line for more information)
| Buy Countersink Cutters from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OSSCO | RI | Countersink Cutters | #3 x 2 | #3 2 center drill & countersink | 4 |
| ||
| SRF | AL | Countersink Cutters | Steel | Plain | #3 x 82 | deg hss 5/16x25/32 countersink | - |
|
| B & K FAST | PA | Countersink Cutters | #3 | #3 combined drill & countersink | 1 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 oal drill/countersink hss | 12 |
| ||
| Ababa | CA | Countersink Cutters | 3-7/64 1/4 | 3 (7/64) 1/4 body x 2 o.a.l carbide drill/countersink | 3 |
| ||
| IPC | VA | Countersink Cutters | #3 | #3 hss rh 60 degree combined drill and countersink keo | 9 |
| ||
| MMCC | IL | Countersink Cutters | M6.3-20.50 | m6.3mm-20.5mm countersink bit set 6.3mm 20.5mm volkel/67300 | inquire |
| ||
| MMCC | IL | Countersink Cutters | M6.3-M20.50 | mm6.3-m20.5 countersink bit set m6.3 m20.5 volkel/67423 | 16 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
